Loading... Please wait...

Categories

Popular Brands

Our Newsletter


Lee Help Videos

VIDEOS PROVIDED BY LEE PRECISION, INC

Bullet Casting: 

Lubing and Smoking Molds

Fixing Leaking Spout 

Double Cavity Mold Block Alignment

Case Preparation:

Case trimming and chamfering

Lubricating case 

Removing stuck case

Pro 1000 PROGRESSIVE PRESS

Pro 1000 Demonstrated

Powder Measure chain attachment

Primer tray trick

Z Bar Adjustment

Zero adjustment 

Hex Ratchet Replacement

Replace Case Sensor Clip

Replace Case Sensor 

Primer Feed Problems 

Removing Shell Plate Carrier 

Installing Shell Plate 

Install and Set Sizing Die 

Install and Set Powder Through Expanding Die 

Install and Set Bullet Seating Die 

Installing Disk In Auto Disk Powder Measure 

Installing Case Feeder 

Primer Arm Binding

Die Adjustment on Single Station Presses:

Pistol Carbide Sizing Die Adjustment 

Pistol Powder Through Expanding Die Adjustment

Pistol Bullet Seating Die Adjustment

Pistol Carbide Factory Crimp Die Adjustment

Rifle Collet Necksizing Die Adjustment

Rifle Full Length Sizing Die Adjustment

Rifle Dead Length Bullet Seating Die Adjustment 

Rifle Factory Crimp Die adjustment 

Load Master Progressive Press:

Load Master Demonstrated

Powder Measure chain attachment

Carrier Alignment

Case Retainer Adjustment

Crankslider Adjustment

Index Checking

Primer Seating Depth Adjustment

Installing Disk In Auto Disk Powder Measure

Die Adjustment

Install and Set Sizing Die

Install and Set Powder Through Expanding Die

Install and Set Bullet Seating Die

Turret Press 

Reloading process demonstrated

Turret Press in operation

Removing and Install a Turret

Four hole turret index adjustment 

Three hole turret index adjustment

Safety Prime installation 

Four Hole Turret Indexing Problems

Primer Arm Binding Problem

Safety Scale 

Reading The Lee Safety Scale